K&N DBXL: 1/5 4wd Buggy RTR (LOS05010) View larger

K&N DBXL: 1/5 4wd Buggy RTR (LOS05010)

LOS05010

New

K&N DBXL: 1/5 4wd Buggy RTR

More details

This product is no longer in stock

No reward points for this product.


1 023,74 €

Add to wishlist

More info

K&N DBXL: 1/5 4wd Buggy RTR

Key Features

  • Genuine K&N air filter included
  • Increased air flow for increased engine performance
  • Full 4WD capabilities
  • Pull start 23cc gasoline engine
  • Machined ring and pinion gear
  • 740cc gas tankr
  • Roll Cage protects chassis and can be removed by taking of only 10 body clips
  • 24mm Hex Standard Hex size in 1/5th scale vehicles. Allows for use of multiple tire and wheel combinations
  • Integrated adjustable servo saver
  • 4mm aluminum chassis
  • Dual disk brakes
  • Sealed differentials
  • Spektrum™ DX2E 2.4GHz radio system included

Needed To Complete

  • 87-93 Octane Gasoline
  • 2-Cycle Oil
  • Gas Can
  • Battery Charger

Overview

Stand out from the crowd and push the limits of RC performance with the Losi® K&N 1/5-Scale Desert Buggy XL. This edition of the hard-hitting Losi Desert Buggy XL comes prepared to take names with an officially licensed K&N body on the outside and genuine K&N air filter inside. The Desert Buggy XL was designed to withstand the rigors of intense off-road driving with a terrain-killing 4WD drivetrain, injection molded roll cage, and 4mm aluminum chassis. Under the hood drivers will find a 23cc gasoline engine that’s sure to make your presence known and a gas tank that delivers over 40 minutes of relentless action on a full tank.

Approximate Assembly Time: Less than 1 Hour
Ball Bearings: Full Ball Bearing Drivetrain
Batteries: Dynamite 1700 mAh receiver pack
Body: Panels, Silkscreened
Brakes: Dual Disc Brakes
Chassis: 4mm Plate, 6061-T6 Aluminum
Completion Level: Ready-To-Run
Differential: Bevel Gear, sealed
Drivetrain: 4WD
Engine Size: Pull start 23cc gasoline
Final Drive Ratio: 10.09:1
Fuel Tank Capacity: 740cc
Ground Clearance: 3.1 in (78.7 mm)
Height: 12.25 in (311.1 mm)
Internal Gear Ratio: 3.31:1
Length: 30.75 in (781 mm)
Pinion: 20T
Radio: DX2E, 2 channel
Servos: Installed 30 kg Servo
Shock Type: Oil-Filled, Coil-Over Springs
Size/Scale: 1/5
Spur Gear: 61T
Suspension: Independent
Tire Diameter: 7.8 in (198.1mm)
Tire Tread: All-Terrain
Vehicle Type: 4WD RTR Off-Road Gas Buggy
Weight: 28.7 lb (13.01 kg)
Wheel Diameter: 4.75 in (120.65mm)
Wheel Hex Size: 24mm Hex
Wheel Width: 2.34 in (59.43mm)
Wheelbase: 22.0 (558.8 mm)
Width: 19.1 in (485.1 mm)

Reviews

No customer comments for the moment.

Write a review

K&N DBXL: 1/5 4wd Buggy RTR (LOS05010)

K&N DBXL: 1/5 4wd Buggy RTR (LOS05010)

K&N DBXL: 1/5 4wd Buggy RTR

Write a review